5977 or 5976 Customer Display on 5934-K021

To install the 5977 or 5976 Customer Display on the 12” Pole and Counter Mount Kit (5934-K021), follow these steps:

1.Locate the Display Mount within 4 meters (13 ft.) of the host terminal.

2.Determine if the cable should be routed down through the mounting surface or if it should be run on top of the surface. Drill a hole if necessary.

3.If you are installing with a post greater than 215 mm (8.5 in.), secure the Table Top Mount (5934-K021) with screws (4) that are appropriate for the mounting surface.

4.Install the Post Mount, the Display Assembly, and the Interface Cable.

•5977 Customer Display – Follow the procedures that correspond to the type of cable bracket used.

•For Cable Management Bracket, refer to Using Cable Management Bracket.

•For Strain Relief Bracket, refer to Using Strain Relief Bracket.

•5976 Customer Display – Refer to 5976 Customer Display.