Removing and Sorting Cables

To remove and sort cables from the existing NCR SelfServ Checkout unit in order to prepare it for the R6 Lite components, follow these steps:

1.Remove 7350 components that must be replaced with R6 Lite components. For more information, refer to Removing 7350 Components.

2.Remove all cable ties that bind the cables.

3.Set the cables to the Printer side of the unit, as shown in the image below.

4.Remove all cable ties securing the cables.

5.Remove and discard the following cables from the bundle:

•Tri-Light Power Cable

•Tri-Light Communication Cable

•Display Cables

•Cooling Fan Power Cable

•DVD Drive E-SATA Cable

6.Install other R6 Lite components. For more information, refer to Installing R6 Lite Components.