Installing the Cash Drawer
The Cash Drawer can be connected to the Cash Drawer connector on the Hub.
Note
The Cash Drawer is purchased separately. The table below lists the compatible NCR Voyix Cash Drawers.
| PID | Description |
|---|---|
| 2176-K016-V001 | Cash Drawer Till MS (16in, 5 Bill 5 Coin) |
| 2177-3000-9090 | Cash Drawer MS (16in, 5 Bill 5 Coin) |
| 2167-3000-9090 | Cash Drawer w/ Till 13" |
Warning
Non-NCR Cash Drawers must contain a protective diode.

The table below shows the cable options.
| Cable | Description | Notes |
|---|---|---|
| 1432-C516-0009 | Dual Cash Drawer Splitter for 24V cash drawers | Required if using two 24V cash drawers on AX5. |
| 1432-C517-0009 | 12V Cash Drawer (RJ12) Adaptor for Single or Dual Cash Drawer | Required if using 12V cash drawers (legacy Radiant) on AX5. Cable allows software to see which drawer is open/closed. |
| 1432-C828-0010 | CX7 Single Cash Drawer 6-pin to 4-pin (12V) Cable | Required if using 12V cash drawer on AX5 . |
The table below shows the cable needed per configuration.
| Cash Drawer | Cable |
|---|---|
| Single 12V Cash Drawer | 1432-C828-0010 |
| Dual 12V Cash Drawer | 1432-C517-0009 |
| Single 24V Cash Drawer | standard option on I/O |
| Dual 24V Cash Drawer | 1432-C516-0009 |