RS-232 Power On Mode (Parameter #1939)

Scan the 1-byte, 3-byte, or 13-byte bar code if the first bar code is lost after boot‑up. The 1‑byte bar code consists of one NULL character, 3‑byte bar code consists of three NULL characters, and the 13‑byte bar code consists of 13 NULL characters. Depending on the bar code type (1‑byte, 3‑byte, or 13‑byte), the scanner sends the bar code data during the boot‑up process.

Scan one of the following bar codes to set the power on mode. By default, this parameter is set to Disable.