The Ethernet interface uses either 10BASE–t, 100BASE–TX protocol. The Ethernet version of the NCR 7199 Series printer offers the web configuration, which configure the Ethernet settings through a Web browser. For more information, refer to the Communication Interface Modes.

Protocol

Application LayerTCP Socket, UDP Socket, SNMP, DHCP, HTTP
Transport LayerTCP, UDP
Network LayerIP, ICMP, ARP
Data Link LayerCSMA/CD
Physical Layer

10BASE–t, 100BASE–TX (IEEE802.3 Conforming)

Auto negotiation 10/100Mbps Full/Half Duplex

TCP socket

It transfers printing commands and data, several status commands and those responses by direct socket communications.

Port number9100 (Default)
Maximum simultaneous sessions1
Maximum simultaneous connections6
Time out120 seconds (Default)

UDP socket

It transfers real time commands and those responses.

Port number3000 (Default)

SNMP

SNMP is used by the SNMP manager to acquire the printer information and status from SNMP agent (Printer).

SNMP versionSNMP v1 (RFC1157) compliant
Transport protocolUDP/IP
MIB support

Part of MIB-II (RFC1213)

Part of HOST Resource MIB

Part of Printer MIB

PDU support

Get Request

Get Next Request

Get Response

Trap

Port number of Server161
Port number for Trap transmit162

DHCP

DHCP is used by the DHCP client (Printer) to acquire IP address, Subnet mask, and Gateway address from the DHCP server.

Transport protocolUDP/IP

HTTP

HTTP is used to configure the network setting by WEB Provision.

HTTP versionV1.1
Transport protocolTCP/IP
Items to be able to configure

IP address

Subnet mask

Default Gateway

DHCP

DHCP address

TCP max. connection

Ethernet Physical LAN Speed

LAN Real Time Command Protocol

Link Down Timeout

TCP idle Timeout

TCP Port number

UDP Port number

SNMP Trap 1

SNMP Trap 2

SNMP Community (R/W)

SNMP Trap 1 Community

SNMP Trap 2 Community

SNMP Trap 1 IP Address

SNMP Trap 2 IP Address

LPR Socket

LPR Socket is TCP Communication port by LPR.

Port number

515

Maximum simultaneous sessions

1

Maximum simultaneous connections

1

Time out

6 seconds

Note

The LPR socket settings is available in NCR 7199 Series ii only.