5915–K171 Enhanced Keypad Key Tips, Double Shot, Pantone Cool Gray 5C

This kit provides Key Tips and Lenses for the Enhanced Keypad.

Kit Contents

Procedure

Key Tip

Installing a Key Tip

Place the Key Tip over its position on the keyboard and press the key until it snaps into place.

Note:  For 1x1 Key Tips, the indentations must always be on the left and right sides.

Removing a Key Tip

Use a Wire Key Tip Removal Tool (5915-K175) to remove a Key Tip from the keyboard.

Insert the hands of the removal tool under each side of the Key Tip and carefully pull the tool upward until the Key Tip pops off its retainer clips.

Key Lens

Installing a Key Lens

Position the Key Lens over the Key Tip and then gently press the lens until it snaps and locks into place.

Note:  The snaps on the lens must be aligned with the indentations on the Key Tip.

Removing the Key Lens

To remove the Key Lens, slide any thin object under the corner of the Key Lens and gently pop it off the Key Tip.