7757-K409/410 64GB/128GB SSD
Introduction
This kit provides a 64GB or 128GB Solid State Drive (SSD) for NCR Columbus 900 POS terminals.
Required Tool
M2 Torx Screwdriver
Kit Contents
|
128 GB SSD (7709-K409) |
||
|---|---|---|
|
|
Part Number |
Description |
|
1 |
006-8626248 |
SSD - M.2 Apacer, 42 mm, 128 GB |
|
64 GB SSD (7709-K410) |
||
|---|---|---|
|
|
Part Number |
Description |
|
1 |
006-8626247 |
Apacer M.2, 64GB SSD, APM2T42SM22064GTN-4ETM-NCR |
Installation Procedure
1.Tilt the Display backward.
2.Slide the Front Cover upward to remove it from the stand.
3.Loosen two thumbscrews and open the I/O Door.
4.Insert the new SSD module into the socket connector at an angle and then rotate the top edge of the module towards the mounting stud on the Motherboard.
5.Secure the SSD module using an M2 torx screw.
