7736-K321 Power Supply Mounting Bracket

This kit provides a Power Supply Mounting Bracket for the NCR Voyix CX8 POS (7736) Power Supply.

Kit Contents

Installation Procedure

1. Use the dimensions shown below or use the Power Supply Bracket as a template to mark the location of the holes. Secure the Bracket using four (4) wood screws.

   

2. Insert the Power Supply into the Bracket (Power Supply Cable end in first).

   

3. Connect the Power Supply Cable to the Power In connector on the terminal.
   Note For clarity, the Power Supply Bracket is not shown in the illustration below.

   

4. Connect the AC Power Cord to the Power Supply, then to an AC outlet.
   Caution Do not connect or disconnect the Power Cable from the terminal with the AC Power Cord connected to an AC outlet.