7736-K022 Dual DB9 Serial Daughtercard

This kit provides a Dual DB9 Serial Daughtercard for the NCR Voyix CX8 POS (7736).

Note

BIOS M17 or later is required if using the Dual DB9 Serial Daughtercard on the following CX8 models:

  • 7736-1100-xxxx
  • 7736-1300-xxxx
  • 7736-1500-xxxx
  • 7736-4500-xxxx

Kit Contents

Installation Procedure

  1. Remove the Top Cover.

    • Top Cover without Duct

      1. Remove the four (4) screws securing the Top Cover to the chassis.

    • Top Cover with Duct

      1. Remove the four (4) screws securing the Top Cover to the chassis.

      2. Slide the Top Cover in the direction shown.

      3. Lift the Top Cover away from the chassis.

  1. Remove the Front Panel Blank from the I/O Ports side of the chassis (2 screws).

  1. Install the Dual DB9 Serial Daughtercard and Bracket Assembly on the inside of the chassis (2 screws).

  2. Connect the USBC Cable to the Daughtercard and Motherboard.

  3. Connect the Header Cable to the Daughtercard and Motherboard.

  1. Reinstall the Top Cover.