7709-K738 Sensormatic R1.1/R1.2
This publication provides procedures for installing the 7709-K738 Sensormatic R1.1 & R1.2 to support integration of a Sensormatic EAS device to the NCR Voyix SelfServ™ 90 (7709).
The installation procedure and components used vary depending on the Product ID (PID) of the kiosk. Refer to the appropriate section below as appropriate for the kiosk PID.
The Sensormatic Controller and Antenna are customer supplied.
Product ID | Installation Procedure |
|---|---|
| 7709-1000-8090 | NCR Voyix 7709 R1.0/1.1 Installation Procedure |
| 7709-2000-8090 | |
| 7709-2200-8090 | NCR Voyix 7709 R1.2 Installation Procedure |
| 7709‑3000‑8090 | NCR Voyix 7709 R2.0 Installation Procedure |
| 7709-4000-8090 |
Kit Contents
Part Number | Description |
|---|---|
| 497-0522053 | 7709-K738 Sensormatic R1.1/ R1.2 |
| 497-0501985 | Cable - Power Pad Rs232 192 Inch |
| 497-0510537 | Shield, Casing, Imager |
| 497-0534867 | Cable - USB-To-Serial Converter (Pl2303-Gc Chip), 762mm (2.5Ft) |
| 006-8604877 | Screw - 6-32X 0.375" Phillips Pan Hd W/ External Washer, Zinc Plated Steel, Sems (3 pcs) |
| 006-8613167 | Screw - Sems, M3X6Mm Ph Phillips Machine Screw External-Tooth Washer, Zinc Plated (6pcs) |
| 497-0520440 | Gasket – 1.6 Mm Thick, 9.525Mm Wide, 42Mm Length, Foam With Adhesive (Cut To Length) |
| 497-0520442 | Gasket – 1.6 Mm Thick, 9.525Mm Wide, 11Mm, Foam With Adhesive (Cut To Length) |
| 006-8615143 | Cable Tie, 142Mm X 3.6mm (10 pcs) |
| * 497-0423108 | Instructions-Kit (Reference Sheet) |
* Items marked with an asterisk are not called out on the image.
