7709-K309 Printer Mount Upgrade (7709 R1.0/1.1 to 2.0)
This publication provides procedures for installing <Kit Name> to the <Complete Product Name>.
This publication provides procedures for installing the 7709-K309 Printer Mount Upgrade (7709 R1.0/1.1 to 2.0) to the NCR Voyix SelfServ™ 90 (7709).
Kit Contents
Part Number | Description |
|---|---|
| 497-0530810 | 7709-K309 Printer Mount Upgrade (7709 R1.0/1.1 to 2.0) |
| 006-8615143 | Cable Tie, 142Mm X 3.6Mm (3 pcs) |
| 006-8622588 | M4 X 6Mm Length, Flat Head, Zinc Plated (4 pcs) |
| 006-8624581 | Screw- M3X0.5X6 Flat Head Phillips Machine (3 pcs) |
| 006-8626386 | Screw - M4X6, Hex Drive Rounded (6 pcs) |
| 006-8626388 | E Clip - 5-7 Mm Od (2 pcs) |
| 006-8626522 | Spring - Extension, Free Length 1" (2 pcs) |
| 006-8626942 | Screw - Shoulder, 5Mm D 8Mm L, M4 |
| 006-8627073 | Zinc-Plated Steel Nylon-Insert Locknut, Class 8, M4X0.7 (2 pcs) |
| 497-0535530 | Rail And Carriage Assembly (2 pcs) |
| 497-0456989 | Label - Service, Green Stripe |
| 497-0470177 | Label - Service, Green, 3.50 X 0.58 In. |
| 497-0524044 | Cable - Usb+Power (24V) To Ra Latch-N-Lok Pos2 Keyed, 0.61M |
| 497-0518794 | Latch - Rod, 7709 R1.2 |
| 497-0526247 | Label – Service, Receipt Printer, Doune Retail |
| 497-0520030 | Bracket - Printer, Tray, 7709 R2.0 |
| 497-0524609 | Bracket - Printer, 7709 R2.0 |
| 497-0521278 | Plunger Mount, 7709 R1.2 |
| 497-0524591 | Bin, Receipt, Printer |
| 497-0527129 | Bracket - Support, Right |
| 497-0527130 | Bracket - Support, Left |
| 009-0007087 | Serrated Nut - Self Locking (M4, 4.2) (8 Pcs) |
| 497-0435725 | Cable -- Ground Wire, 12 Awg, 6" |
| 497-0474872 | Cable - Ground Wire, 12 Awg, 12 Inch |
| 497-0538239 | Printer - 7709 Doune Thermal Receipt 1St 80Mm Firmware Main V62.13, Ipl V30.01, Sbcs V01.03, Dbcs V01.03, Table V31.04 |
| * 497-0423108 | Instructions-Kit (Reference Sheet) |
* Items marked with an asterisk are not called out on the image.
