Turning off the hardware system

To turn off the NCR Voyix SCO Hardware (7372) hardware system, follow these steps:

1. Shut down the NCR Voyix SCO Hardware (7372) software system. For more information, refer to Shutting down the software system.
2. Disconnect the unit from the dedicated power outlet.
   Note

   The AC Power cable is connected to the system Power Supply inside the Pedestal CabinetTower Cabinet.

   Note

   Wait at least five seconds before turning on the system.

   Caution

   The AC line voltage primaries are live at all times when the power cord is connected. Therefore, disconnect the AC power cord before opening the unit to install features or service this unit.