7350-K915 R5 EFT Printer Upgrade
This publication provides procedures for upgrading the existing Self-Service Receipt Printer of a NCR SelfServ™ Checkout (7350) unit with an R5 EFT Printer.
Required Tools
The following tools are required for upgrading the NCR SelfServ™ Checkout (7350) unit with an R5 EFT Printer.
•Hand Drill
•M7 or equivalent drill bit
•Magnetized screwdriver to easily handle the screws.
Kit Contents
|
Part Number |
|
Description |
|
|---|---|---|---|
|
497-0530747 |
|
7350-K915 Kit, R5 EFT Printer Upgrade |
|
|
|
497-0530787 |
|
Printer Bracket with Cable Guard Assembly |
|
|
497-0530788 |
|
Base Bracket |
|
497-0530789 |
|
Top Plate Support Bracket |
|
|
497-0530790 |
|
Printer Tray |
|
|
497-0530791 |
|
Cable Guard |
|
|
006-8628182 |
|
Screws - M4 x 0.7, Pan Head Combination Phillips/Slotted, 10 mm (5 pcs) |
|
|
006-8628181 |
|
Screws - M4 x 0.7, Flat Head Phillips, 10 mm (2 pcs) |
|
|
|
497-0529281 |
|
SSCO6 80MM PRINTER 1-ST |
|
|
497-0523755 |
|
Cover - Plastic - Lower - No Dip |
|
|
006-8611286 |
|
Screw - 8-32 x 0.375 in Phillips Pan Head, Captive External Tooth Washer, Trivalent Coating (4 pcs) |
|
|
497-0478391 |
|
Blank - Plastic - Topaz |
|
|
006-8616045 |
|
Metric Zinc-Plated Steel Large-Dia Flat Washer M4 Screw Size, 12 mm OD, 0.9 mm - 1.1 mm Thick |
|
|
006-8612446 |
|
Screw - 8-32 x 0.375 in Phil Pan, Self Tapping - Type F |
|
|
009-0006580 |
|
Screws (Thread Forming Screw) M3 |
|
|
497-0508477 |
|
Cable (BLK) 3M 2 x 4 LATCH-N-LOK,POS2 Keyed to USB+Power (24 V) |
|
|
497-0524269 |
|
Label - Printer 7350-K961 |
|
|
497-0530766 |
|
Label - Printer Upgrade Kit, R5 |
|
|
497-0456066 |
|
Lens - Plastic - MotionSensor - Lower Door |
|
|
006-8616341 |
|
Optoelectronic Device, 3 pin |
|
|
006-8611199 |
|
Screw - 4-20 x 0.250 in Phillips Pan Head, Plastite, Blue Zinc (2 pcs) |
|
|
006-8611077 |
|
Screw-M3x6 PH Phillips (2 pcs) |
|
|
497-0456754 |
|
Cable - Proximity Sensor |
|
|
006-8627803 |
|
M4 x 0.7 mm Serrated Flange Locknut (4 pcs) |
|
|
006-8628182 |
|
Screw - M4 x 0.7, Pan Head Combination Phillips/Slotted, 10 mm |
|
* |
497-0423108 |
|
Instructions Kit (Reference Sheet) |
* Items marked with an asterisk are not called out on the image.
