Installing Bagwell Skirt Panels

To install Bagwell skirt panels, follow these steps:

1.On the side of the Bagwell, do the following:

a.Attach the skirt panel to the skirt brackets by aligning the open slots in the skirt panel with the screw holes in the skirt bracket.

b.Secure the skirt panel to the bracket using three (3) screws.

c.Adjust the skirt panel so that it is flush with the floor.

d.Tighten the screws to secure the skirt in place.

2.On the front and back of the Bagwell, do the following:

Note:  The front and back skirt panels of the Bagwell must be installed after the side skirt panel of the Bagwell.

a.Attach the front and back skirt panels to the skirt brackets by aligning the open slots of both skirt panels with the screw holes in the securing bracket.

b.Secure both skirt panels to the bracket using eight (8) screws.

c.Adjust the skirt panel so that it is flush with the floor.

d.Tighten the screws to secure the skirt in place.