2246-K900 Pedestal, ADA Mount (Dark White and Impact Mid Silver)

This publication provides procedures for installing the Pedestal kit on an NCR SelfServ™ XK22 (2246) Kiosk.

Note:  This document covers procedures for Single Kiosk installation only. For Back–to–Back Kiosk installation procedures, refer to Back-to-Back Kiosk Kit Instructions (2246-K040/041).

The NCR XK22 Kiosk offers the following two options for Pedestal Mount installation:

•Single Bolted kiosk — the kiosk pedestal is bolted to the floor and cannot be transferred from one location to another. This option requires drilling bolt holes on the floor. The anchors or bolts are not shipped with the kiosk and must be obtained locally.

•Back–to–Back Bolted kiosk — the two kiosk pedestals are installed back–to–back and are both bolted to the floor. This option requires the 2246-K040/041 Back-to-Back Kiosk kit, which can be purchased separately.

•Single Free Standing kiosk — the kiosk pedestal is bolted to a baseplate (2246-K400 Baseplate kit), which can be purchased separately. This option does not require drilling bolt holes on the floor.

Note:  For more information on bolts and anchors specifications, refer to NCR SelfServ™ XK22 (2246) Site Preparation Guide (BCC5-0000-5390).