Installation Procedures
The NCR N3000 Site Controller has two SODIMM slots that can support up to 16 GB of volatile memory. Memory upgrade may involve replacing the pre-installed memory or adding a memory module.
Warning: Internal components of the N3000 platform are ESD sensitive. All proper grounding precautions must be taken before opening the chassis. NCR strongly discourages opening the chassis or performing field upgrade operations, unless the changes are made by a certified technician or NCR representative.
! Important: All memory features containing one memory module should be installed into the lower socket (DIMM 1 Slot). Any memory upgrade that requires adding an additional memory module should be installed in the upper socket (DIMM 2 Slot).
Installing the memory module involves the following procedures:
