Imaging Procedure

  1. Connect the USB flash drive to the target terminal that you wish to image.
  2. Connect a USB keyboard to the terminal.
  3. Power on the terminal and boot from the USB Flash Drive. This can be done by pressing F8 during the boot and choosing the USB option (NCR), or by entering BIOS Setup and changing the boot order. The system boots in the Windows PE OS environment.
  4. Press Y on the keyboard at the confirmation prompt to re-image the terminal.
  5. When the imaging process is complete, enter Exit on the keyboard to reboot the system.
  6. After the reboot, remove the USB Flash Drive and disconnect the keyboard.