Control Buttons

The Control Buttons show the available features that can be modified. Unavailable features are grayed out.

Control ButtonDescription
Refresh ButtonRefreshes data in the Monitors Detected panel (OSD does not auto detect). Use this button after connecting a new monitor to refresh the data.
About ButtonDisplays a brief description of the utility.
Help ButtonOpens the Help File.
Close ButtonCloses the OSD application.
Information

Provides information about the selected monitor. Information includes:

  • Device manufacturer
  • Date manufactured
  • EDID version
  • Input type
  • Dimensions
  • Monitor name
  • Monitor serial number
  • Preferred timing
  • Controller type
  • Firmware level
  • Firmware version (for Dynamo display only)
  • Display mode (for Dynamo display only)
  • Timing Report
    • Horizontal frequency
    • Vertical frequency
    • Timing status
  • Raw EDID
  • Raw capabilities string (CAPS)
BrightnessProvides tools for adjusting Display brightness settings.
ContrastProvides tools for adjusting Display contrast settings.
PositioningProvides tools for gradually moving the image on the Display to a specific region (either left, right, up, or down).
SizeProvides tools for increasing or decreasing the height and width of the image on the Display.
PhaseProvides tools for increasing or decreasing the phase shift of the sampling clock.
ClockProvides tools for increasing or decreasing the video sampling clock frequency.
ColourProvides tools for adjusting Display color settings.
SharpnessProvides tools for increasing or decreasing the sharpness settings of the Display.
Restore

Provides the following functions:

  • Auto Setup – sets horizontal position, vertical position, clock, and phase.
  • Auto Color – sets red/green/blue gain.
  • Factory Defaults – restores all factory defaults including brightness, contrast, and color.
  • Brightness/Contrast – restores factory defaults for brightness and contrast.
  • Geometry Settings – restores factory defaults for geometry settings such as horizontal position and vertical position.
  • Color Settings – restores factory defaults for color settings.
DegaussProvides tools for CRT display to perform a degauss cycle.
MoireProvides tools for increasing or decreasing the vertical or horizontal moiré picture cancellation.
LanguageProvides listing of the supported languages and permits changing the OSD language.