Select Printable Area
This command sets the position and size of the printing area in Page Mode.
ASCII |
ESC X x y dx dy |
Hexadecimal |
1B 58 x y dx dy |
Decimal |
27 88 x y dx dy |
Value of x |
Horizontal starting position |
Value of y |
Vertical starting position |
Value of dx |
Horizontal printing area |
Value of dy |
Vertical printing area |
Remarks:
•This command is effective only in page mode.
•If the starting position (x, y) is outside the maximum range, the entire command is ignored.
•If the printing area is defined outside the maximum page size, the printing area is limited to the page size.
•Maximum page size is 576 dots in the horizontal direction, and 2000 dots in the vertical direction.